PREPARATION

Tools:
- Provided allen key/hex key

NOTE: Ensure you received the correct model of the KATANA.

GEN 5 17/34/45 - Smooth surface
GEN 5 19/23 - 2 Dimples

STEP. 1

Slightly loosening the set-screw.

Loosen the screw until the aluminum plug wiggles a little.

STEP. 2

Fitting the KATANA to your firearm.

Align the KATANA to the bottom of the firearm and fit the aluminum plug with the prongs facing the inside of the firearm.

STEP. 3

Fitting the KATANA to your firearm.

Hook the front of the KATANA to the firearm. Make sure the aluminum plug is still lined up in the hole.

NOTE: if the plug is not going into the frame, you will need to sand down the prongs a little. The plug has to go all the way in.

STEP. 4

Tightening the set-screw.

Using the included allen/hex key tighten down the screw by hand until it's snug.

STEP. 5

Final NOTE.

There will be a slight gap at the rear of the firearm. This is intended for the use of Glock back straps.