The Stiletto is our Trigger designed for EDC & machined 100% in house out of premium billet materials. Engineered from the ground up to be Safe, Consistent, Predictable - what a carry trigger should be.
INTENT #1: Design a trigger specifically for EDC & High Stress situations. We engineered the Stiletto to take up in 2 stages, with the first stage allowing users to remove the slack in preparation for the shot. Once the target is properly acquired, the second stage requires minimal pressure to fire, resulting in a predictable pull with less muzzle movement.
INTENT #2: Create increased surface area allowing users to effectively manipulate their trigger even with off center finger placement common is high stress situations. We machined the safety of the Stiletto to have 4x the surface are of the OEM trigger allowing even the largest of fingers to have enough purchase area while still retaining all drop safety features.
INTENT #3: Achieve a responsive trigger that improves both initial & follow up shots. Curved & angled triggers absorb the excess flesh of the finger causing weight to be spread across a large surface area. With the flat face of the Stiletto & safety, the natural vibrations of the action are transferred to a single point of your finger dramatically increasing responsiveness. This results in resets that are instantly felt allowing for faster follow up shots.
- 3-3.75lbs firm medium take up-wall-firm medium reset
- EMPIRE modified OEM trigger bar
- 2.5-3.5lbs firm medium take up-wall-firm short reset
- EMPIRE modified OEM trigger housing
- 50% reduced over travel/reset vs. standard line
- EMPIRE high lubricity OEM connector
- EMPIRE polished OEM trigger spring
- Disassembly tool
- The Redline is not available for the 43 series
Example: G48 Aluminum 2-Tone Shoe / Raw Safety
Remember Training & Consistency always outweigh parts.
Triggers will be assembled & shipped approximately 5 Business Days of order.
The Stiletto was Designed for OEM springs & connectors, trigger weights may vary with gen or aftermarket parts used
Black & Red line Triggers are preset for the standard tolerances of chosen model, however may require minor fitment in your specific platform.
The Stiletto was designed for the tolerances of OEM frames. While we have tested it in Non-OEM frames, we cannot guarantee the same function. It is a constantly evolving product, with the latest batch differing slightly from the previous.