Installing your OCULOS 

  • Your OCULOS rear sight is pre-set do not adjust it.
  • First you will need to install your OCULOS front sight.
  • Remove the screw from your front sight and place it in the front sight hole.
  • Keep a light downward pressure on the front sight.
  • Add minimal blue loctite to your front sight screw.
  • While keeping pressure insert the screw from the bottom and tighten.
  • Line up the OCULOS rear sight with your front sight. 
  • Use Supplied key to tighten. 
  • Alternate between the left and the right ensuring the rear sight stays level.
  • DO NOT OVER TIGHTEN. 
  • The OCULOS requires no more than a hand tight fit to be securely seated.